TrapBlaster 7 Pneumatic DPF Cleaner - Model 1627
Equipment Specifications

• Stage 1 air cleaner for Diesel Particulate Filters and Catalysts.  

TrapBlaster 7 now supports two modes of operation: FullAir mode - Achieve Maximum Performance with 120CFM (30hp) air supply at 100psi to clean your filter fast and efficiently AirSaver mode - Get your filters "FSX Clean" with 68CFM (15hp) air supply. AirSaver mode has been certified to clean filters just as well as FullAir mode. With a smaller air supply and alternating upper and lower air blast nozzles, the same level of cleaning is performed by extending the process time.

• Automatic operating mode allows operator to walk away.

• Manual overrides allow “on the fly” adjustments for custom cleaning.

• High pressure scanning air jets simultaneously cleans both ends of the filter for superior ash removal.

• Each filter cell is addressed individually to assure that no cell is left un-cleaned.

• Upper and lower window with internal lights let the operator watch the dust come out of the filter. Cleaning is done when ash stops coming out.

• Diagnostic feature built into the cleaning action  allows detection of failed cell walls & defective filters.

• Scanning air jets do not harm cell walls, platinum coatings or dislodge ceramic from the casing.

• Adjustable nozzle system allows cleaning under filter flanges and into recessed cavities.  

• Fully adjustable for filter heights from 6” to 36” with the flip of a switch.

• Nozzle travel distance is switch controlled to allow quick change for filter diameters ranging from 6” OD to 16” OD.

• Side stitch feature allows focusing the cleaning action on the outside perimeter of the filter.

• Timer activates signal light.  Cleaning time will vary from 15 minutes to 45 minutes depending on filter diameter, height and loading.

• Includes Adapter Plate Kit that fits all open end DPF filters ranging from 6” to 14” ID
  Smaller Adapter plate kit is optional.

• Emergency shutoff switch stops all functions.

• Door switch stops all blowing for safety.

• Quiet 84 dBA.

Technical Specifications: Exhaust:  8” QF duct connection on bottom left side or back left Dimensions:  77”H x 48”W x 30”D Weight:  850 lbs Electrical:  Standard outlet 115 Volt, 1 ph, 20 amp. UL controlled

Ancillary equipment required: Air supply: 120 CFM @ 100 psi in FullAir mode , 68 CFM@100psi in AirSaver mode (both with air dryer) Dust Collector: 1400 CFM or greater (with clean filters)

• Proven performance on thousands of DPF filters
• Technology used since 2001 on industrial filters
• Tested, approved and being purchased by OEM’s