TrapTester 7 Air Flow Test Bench
Equipment Specifications

• Calibrated specifically for precision measuring of air flows on DPF.

• Used to record before and after cleaning air flows on customer filters to determine success or failure on cleaning the filter.  Critical for warranty administration. 

• Includes one w.g. magnahelic pressure gauge

• The FSX TrapTester Air Flow Test Bench is now being used as the Standard measuring device by engine and truck OEM’s and dealers for repeatable testing nationwide.  Every location needs the ability to get the same air flow readings for warranty and maintenance.
  Now being purchased by Volvo, Caterpillar and Cummins dealers.

• Used to measure filter performance at each stage of cleaning process and to identify defective filters.

• Handles 9” diameter filters and larger. Optional adapter plate available for smaller diameter filters.

• Includes filter baseline data base chart listing air flow readings and cleaning target ranges for most common DPF filters used on trucks, buses and heavy equipment that have that have sent filters to FSX or reported test readings.
  (Chart subject to change daily as new filters tested)
  (Grid only available with full equipment purchase)

• Inlet and exhaust are screened for safety.

• Durable steel construction built to take abuse of 70 lb filters day and night.  This test bench was
  developed and proven at FSX cleaning centers that handle thousands of DPF filters

Technical Specifications: Dimensions:  30”/72”H x 24”W x 44”D (approx.) Weight:  240 lbs Decibels:  74 dB without filter over inlet; quieter with filter over inlet Electrical:  1 .5 HP motor requires 460/220/208 Volt, 3-phase power UL control

Ancillary equipment recommended: Dust Collector:  500 CFM or greater to capture any particulate released while testing dirty filters (Contact FSX for special instructions before connecting duct) FSX TrapBlaster Pneumatic Filter Cleaning machine FSX TrapBurner Thermal Filter Cleaning machine